HORIZONTAL WIRE MANAGEMENT TRACK
3” x .75” 4-channel wire management track, a co-extrusion with rigid sides and a softer top. Each channel is .75” x .625”. In the center of each channel is a slot which has a memory, so it closes back up. Sold in 36” lengths, easily cut to desired length in the field. Features two strips of factory installed double sided tape on each 36” piece. Field Installed.
HORIZONTAL CONFERENCE WIRE MANAGEMENT TRACK
12” wide x 34” long x 6” high 18 gage steel track, with eight 6” access holes, powder coated black. Attachment hardware and installation instructions are included. Field installed.
METAL MODESTY PANEL WIRE MANAGEMENT J-CHANNEL
16 gage x 3.5” high x 2.37” deep horizontal J-Channel that hangs on free swinging perforated metal modesty panel. J-Channel simply clips into modesty panel slots, no hardware required. Sits 4.75” below bottom of top. Available in black or silver powder coat. Field Installed.
VERTICAL ABS PLASTIC WIRE MANAGEMENT
Half round shaped 2.68” x 1”, combination of rigid and flexible PVC, vertical wire management. Heavy duty self-adhesive sticky tape is pre-installed on hinged edges of 22” long piece which allows track to conform easily to curved surface. Available in Black or Silver.
VERTICAL LASER CUT HOLE WIRE MANAGEMENT
1.5” x 2.5″ holes cut in top and bottom of column to feed wire(s) in and out of base.
aFIX ROUND BASE VERTICAL WIRE MANAGEMENT
3” diameter column with 1.5” round holes cut in top and bottom of column to allow wire(s) to feed in and out of column. Holes are located approximately 2.5” from top of the base and 2.5” from floor. Wire(s) can be ran directly into the bottom of base, wire bundle must fit within a 2.5” diameter area.
aFIX BOAT-SHAPE BASE VERTICAL WIRE MANAGEMENT
The aFix Base was designed with wire management in mind, features a 3.625” x 8” boat-shaped column with 3.5”wide x 2” high openings in top of column to feed wire(s) into base with a 1.875” wide x 3.875” long opening through column to feed wire(s) down to the floor.
CAPITOL WIRE MANAGEMENT
The Capitol Base was designed with CPU storage and wire management access in mind. Each unit features hinged doors at each end with an opening of 10.25” wide and 19.5” tall. Inside top edges of the base features 5” wide x 1.5” tall notches to allow pass through of wire(s) from base to base or top to base. Bottom of the base features a 5” x 8” opening to access floor receptacle. Opening at top of base allows a regular power box to be mounted directly over base, larger power boxes should be offset of base or contact factory for a customized base quote.
UNION WIRE MANAGEMENT
The Union Base features our 3” wide four-channel extruded PVC wire management track, flush mounted down center of the panel. End panels feature track running full length of one side of panel – 27”. Center panels feature 21” of track recessed in panel on one side centered below a 13.75” wide x 5.75” high notch for accommodating power boxes. Accommodates all power boxes except for the Poly Through. Factory Installed.
CANYON WIRE MANAGEMENT
All Canyon Bases come standard with two 2” diameter wire management holes located 3” to center of hole from top edge of base, on opposite sides of base to accommodate pass through of wire(s) from base to base or top to base. Optional wire management access door is 8” wide x 10” high and is located starting 2” above bottom of base below one of the wire management holes. Door features a 1” x .75” finger pull and is attached with Velcro to allow easy access of wire(s) and floor receptacle. The 18” bases feature 12” openings in top and bottom and can accommodate up to a regular power box. The 24” bases feature 18” openings in top and bottom and can accommodate up to a Double power box or Mini Oasis.
RAILWAY WIRE MANAGEMENT
The Railway Base is the ultimate wire management base, featuring removable doors and opening size to accommodate any size power box or trough, any number of wires or conduit, and floor receptacles.