Empire
Soar to new heights with Hi5’s Empire Collection. These adjustable tables have a height range spanning 20 inches to 48 inches high!
COLLECTION FEATURES
- Stationary
- Seated, cafe height and bar height
- Heavy duty construction for high use spaces – solid steel bases
- Mobile
- Seated, cafe height and bar height
- Beam Nesting
- Seated, cafe height and bar height
- Hand Crank
- Supports Laminate tops
- Beam Nesting & Hand Crank
- Supports Laminate tops
- Removable handle that is stored under table top
- Pneumatic
- Supports Laminate tops
- For T style bases, replace ** in model code with one of the following codes for lift capacity
- 70 – 30-70 lbs.
- 82 – 42-82 lbs.
- 93 - 53-93 lbs.
- 104 - 64-104 lbs.
- 115 – 75-115 lbs.
- 138 – 98-138 lbs.
- 160 – 120-160 lbs.
- 183 – 143-183 lbs.
- For X style bases, replace ** in model code with one of the following codes for lift capacity
- 44 1 - 44 lbs.
- 55 15 - 55 lbs.
- 66 26 - 66 lbs.
- 77 37 – 77 lbs.
- Electric (sit-stand)
- Supports Laminate tops
- Reset at mid range rather than lowest point
- Weight capacity is based on balanced load. Based on 210 lbs. per unit with 40 lbs. per additional leg.
- Electric (occasional-stand)
- Supports Laminate tops
- Reset at mid range rather than lowest point
- Weight capacity is based on balanced load. Based on 210 lbs. per unit with 40 lbs. per additional leg.
- Powered or non-powered table options
- Bases available in Silver, Black or White power coat
Statement of Line
Hand Crank Specs
- Adjust with manual crank handle at a rate of 6-1/3 turns per inch for infinite stop positions. Hand Crank Beam Nesting Tables have removable handle that is stored under table top. Other hand crank tables allow the handle to slide under table when not in use. Maximum lifting load of 180 pounds for T based tables. Optional locking casters are available which adds 2” to starting height.
Pneumatic Specs
- Pneumatic adjustment with easy lever release. Pneumatic cylinder assist with infinite stop positions with no-bounce cylinder stop. Steel roller glide system. Unintentional-release resistant lever with cable release. Table height range of 17.7”, 27.25”h to 45”h. Range Lifting force of forty four (44) pounds standard. Additional lifting forces are available, contact factory for information. Available options include Flip-top and Locking Casters. Casters add 2” to starting height.
Electric Specs
- Electric motor adjustment at the touch of a switch. Infinite stop positions with adjustment speed of 1.97” per second (50mm/sec). Two table height ranges to choose from: 19.69” of range, 27.25”h to 46.94”h or 26” of range, 22.25”h to 48.25”h. Simple up and down buttons, control up to 12 columns from a single keypad. Maximum lifting force of 225 pounds for two columns. Options and accessories include: Built-in Key pad w/display, Built-in memory keypad with display, key pad cable extensions, motor cable extensions, Link Cables, and safety sensors.
- Weight capacity is based on balanced load.
- Based on 210 lbs. per unit with 40 lbs. per additional leg.
- Electric Units reset at mid range rather than lowest point.
- Preset Memory keypad slides in and out to store under surface when not in use. Digital display shows approximate height of table. Moves table UP | DOWN and allows 4 preset memory positions.
- Digital keypad mounts in surface and displays approximate height of the table. If casters are added to the table, the digital keypad is not recommended. Moves table UP | DOWN and allows infinte stops.
Warning
- Empire height adjustable tables require a high level of installation and product knowledge. Caution should be taken at all times when assembling adjustable height products. There are warning labels and tags on items that require close attention. Please follow all assembly instructions and warnings when unpacking and assembling adjustable height productions. Miss-use or improper handling of product will result in voiding of warranty and possible injury to assembler/end-user. Hi5 Furniture, Inc. does not hold responsibility for any damage to product due to miss-use, lack of attention to instructions.
One-year warranty on height adjustable base systems, including motors and moving parts
Table Shapes
Rectangle
Round
Square