Real Plants Naturally Preserved

PLANTS AND MOSSES ARE PRESERVED AFTER HARVEST WITH GLYCERINE AND FOOD COLORING.

1. CULTIVATION

The plants for Hi5’s Gather collection are cultivated on certified farms – just like carrots or mushrooms. Appropriate care ensures the best possible conditions to create an optimal harvest.

2. HARVEST 

The harvest is done by hand with love and care. Subsequently, the harvested plants are pre-sorted by hand. Only the plants that meet the highest quality standards are later used in processing.

3. PRESERVATION 

Natural preservation keeps the plants permanently beautiful and makes them easy to maintain. In an exchange process, the water in the plant is replaced by glycerine and the chlorophyll is replaced by food coloring.

4. PROCESSING 

Artistic florists arrange the plants by hand by hot melt glueing the plants to the MDF board. Each plant is a true original.

MUST BE HANDLED WITH CARE DURING INSTALLATION

The plants come glued to MDF board. Using the screws provided by hi5, screw through the plants and MDF board into the metal bracket inside the metal planter bucket.

Typical Moss Plants are standard with a variety of:

Brocade Moss •  Chinese Cymbidium •  Cider Gum •  Green Trick Dianthus  •  

Himalayan Ivy •  Leather Leaf Fern •  Lemon Scented Gum.

Typical Jungle Plants are standard with a variety of:

Algerian Ivy  •  Asparagus Fern •  Brocade Moss •  Cider Gum

Foxtail Millet •  Lady Fern •  Leather Leaf Fern •  Vegetable Lamb

FREQUENTLY ASKED QUESTIONS

Are the plants real?

Yes, Hi5 only uses only real plants, which are preserved with a natural process that uses glycerine and food coloring. As a result, the plants become stable and require no additional care.

How are the plants preserved?

The special preservation method is based on water, food coloring and glycerine or salt and therefore poses no health risks.

Do the plants require care?

No, no care is necessary. On the contrary: the preserved plants should never be watered under any circumstances.

They also require no light and because of their antistatic properties, they do not collect dust. 

In short: 100% nature. 0% care.

What happens in direct sunlight?

In direct sunlight, some plants may fade after 2 - 3 years.

Where can Hi5 products be placed?

As long as the humidity is under 70%, the plants can be used anywhere indoors. Preserved plants are not suitable for outdoor environments. 

Do the plants have an impact on the acoustics of a room?

Yes, they act much like acoustic panels made of soft natural materials and reduce both noise and reverberation in indoor areas.

Do the plants or moss have an odor?

Since they are natural plants, they have the typical, natural odor that dissipates with time.

Do the plant pictures look exactly like they do in the catalog or on the website?

No, not 100%. Firstly, our plant are handcrafted.  Secondly, the plants are natural products that may vary in

color and form. Each plant is therefore unique. 

Power 

Tuck

  • Non-Linking with a 108" cord 
  • 2 outlets; 1 USB-A; 1 USB-C
  • Black or White

Zest

  • Linking or Non-Linking with a 108" cord 
  • 2 outlets;
  • Black or White

Chirp

  • Non-Linking with a 72" long cord
  • 2 outlets; USB-A; USB-C; AV plate for HDMI or data jacks 
  • 60 watt FAST CHARGE available
  • Black, Silver or White

Slick

  • Linking or Non-Linking with a 108" cord 
  • 2 outlets; USB-A  
  • Black, Silver or White

Pearl

  • Non-Linking with a 72" cord 
  • 1-2 outlets; USB-A
  • Black, Silver or White

Cove

  • Linking or Non-Linking with a 108" cord 
  • 2-4 outlets; USB-A, USB-C & AV Plates for HDMI or data jacks 
  • 60 watt FAST CHARGE available
  • Black, Silver or White

Charm

  • Non-Linking with a 72" long cord
  • 2 outlets; AV plate for HDMI or data jacks 
  • 1 outlet under the table
  • Black, Silver or White

Zing

  • Linking or Non-Linking with a 120" cord 
  • 2 outlets and USB-A 
  • Black, Silver or White 
  • Pop-up unit with a push of a finger

Jazz

  • Linking or Non-Linking with a 108" cord 
  • 4 outlets; USB-A, & AV Plates for HDMI or data jacks
  • Black, Silver or White

Volt

  • Linking 
  • 6 outlets; USB-A, & AV Plates for HDMI or data jacks
  • Black, Silver or White

Model Code: M1

(Crossing Pattern)

20GA x 9" high perforated steel panels are free swinging

    Model Code: M2

    (Pagoda Pattern)

    20GA x 9" high perforated steel panels are free swinging

    Model Code: M3

    (Tread Pattern)

    20GA x 9" high perforated steel panels are free swinging

    Model Code: M4

    (Racetrack Pattern)

    20GA x 9" high perforated steel panels are free swinging

    Model Code: M5

    (Brickyard Pattern)

    20GA x 9" high perforated steel panels are free swinging

    Model Code: M6

    (Finish Line Pattern)

    20GA x 9" high perforated steel panels are free swinging

    Model Code: MMC

    AFIX Lecture Hall Metal Modesty Panels

    14" high perforated steel panels are fixed 

    Loop Clamps

    Model Code: WLOOP

    Four loop clamps are provided with every power box to secure cables under the table top. Sold in packs of 4 for extra cables.

    Table Gangers

    Model Code: TG

    Simply twist and lock in place. Factory installed. Not available on knife profile edges, solid surface, quartz or wood edged table tops.

    Leveling Gangers

    Model Code: QR

    Simply loosen the knobs, slide plate over, tighten knobs and tops are joined and leveled. Inserts are factory installed, plate and knobs are field installed. Not available on knife profile edges, solid surface, quartz or wood edged table tops.

    Bag Hook

    Model Code: HOOK

    Black 14GA bent steel hook holds up to 100 lbs. and can be placed anywhere under your table. Field installed.

    Floor Anchored Bracket 

    Model Code: FA

    Steel bracket provides way to fix the table to the floor. Screws to drill into the floor are not provided. 

    Swivel Cup Holder 

    Model Code: CUP

    Secured with screws, this cup holder is 8” x 5” 14GA steel, has 110º of swivel and fits two sizes of cups: standard 2.75? and larger 3.5?

    Available in black only

    Tablet Holder  

    Model Code: TAB

    Secured with screws, this tablet holder is 6” x 8” 16GA steel, has a 2" flange that screws under the top 

    Available in Black, Silver or White 

    Powered Apron 

    Model Code:  APU

    Recommended for: Union 2.0 Tables

    3.25” high x 12GA steel apron beam to house power. (Cove power units are sold separately)

    Grommet

    Model Code: G (B/S)

    Table tops are cut at factory to receive this 3" plastic grommet.

    Available in Black or Silver 

    Powered Island

    Model Code: WPP

    The base includes a formed steel box under the surface to house the power unit. The base column is hollow and the bottom of the base includes an exit hole for the cables. The formed steel box clearance dimensions are 7.5” wide x 10” long x 3” high

    Magnetic wire manager

    Model Code: WMAG

    Recommended for: Coby Square, Empire, Jewel, Lincoln (square or rectangular bases only)

    1” deep X 2" wide x 17.75" tall; 22GA steel with open slot to accommodate any cable. It weighs 1 lbs.

    Available in Black, Silver and White 

    Cable Base with holes

    Model Code: WB

    Recommended for: Coby Apron, Coby Post, Gateway, Harbor, Supreme

    1.5” x 2.5" holes cut in the top and bottom of the base column to feed wire(s) in and out of base.

    Snap on wire manager

    Model Code: WMC2.3

    Recommended for: Gateway “TT” bases and Gateway beam nesting tables

    Easy steel snap-on cover has the capacity for many cables. Standard 17 3/4” length

    Available in Black, Silver or White 

    Steel Cable Trough

    Model Code: WT

    Recommended for: Railway or Trestle Tables. Also, commonly used with Jazz and Volt power units.

    12” x 34” long x 6” high, black 18GA steel trough with side access holes. 

    Industrial Locking Casters

    Model Code: CSI

    Recommended for: Coby Apron, Coby Post, Coby Square, Lincoln and Union 2.0 tables. 

    Designed for both hard & soft floors. The grey polyurethane wheel is 5" high and has ball bearings.

    Weight capacity is 300 lbs. per caster