Options + Power

Model Code: M1

(Crossing Pattern)

20GA x 9" high perforated steel panels are free swinging

Model Code: M2

(Pagoda Pattern)

20GA x 9" high perforated steel panels are free swinging

Model Code: M3

(Tread Pattern)

20GA x 9" high perforated steel panels are free swinging

Model Code: M4

(Racetrack Pattern)

20GA x 9" high perforated steel panels are free swinging

Model Code: M5

(Brickyard Pattern)

20GA x 9" high perforated steel panels are free swinging

Model Code: M6

(Finish Line Pattern)

20GA x 9" high perforated steel panels are free swinging

Model Code: MMC

AFIX Lecture Hall Metal Modesty Panels

14" high perforated steel panels are fixed 

Loop Clamps

Model Code: WLOOP

Four loop clamps are provided with every power box to secure cables under the table top. Sold in packs of 4 for extra cables.

Table Gangers

Model Code: TG

Simply twist and lock in place. Factory installed. Not available on knife profile edges, solid surface, quartz or wood edged table tops.

Leveling Gangers

Model Code: QR

Simply loosen the knobs, slide plate over, tighten knobs and tops are joined and leveled. Inserts are factory installed, plate and knobs are field installed. Not available on knife profile edges, solid surface, quartz or wood edged table tops.

Bag Hook

Model Code: HOOK

Black 14GA bent steel hook holds up to 100 lbs. and can be placed anywhere under your table. Field installed.

Floor Anchored Bracket 

Model Code: FA

Steel bracket provides way to fix the table to the floor. Screws to drill into the floor are not provided. 

Swivel Cup Holder 

Model Code: CUP

Secured with screws, this cup holder is 8” x 5” 14GA steel, has 110º of swivel and fits two sizes of cups: standard 2.75? and larger 3.5?

Available in black only

Tablet Holder  

Model Code: TAB

Secured with screws, this tablet holder is 6” x 8” 16GA steel, has a 2" flange that screws under the top 

Available in Black, Silver or White 

Powered Apron 

Model Code:  APU

Recommended for: Union 2.0 Tables

3.25” high x 12GA steel apron beam to house power. (Cove power units are sold separately)

Grommet

Model Code: G (B/S)

Table tops are cut at factory to receive this 3" plastic grommet.

Available in Black or Silver 

Power pass through base

Model Code: WPP

Recommended for: Island tables or square & round Supreme tables with “X” bases

The base includes a formed steel box under the surface to house the power unit. The base column is hollow and the bottom of the base includes an exit hole for the cables. The formed steel box clearance dimensions are 7.5” wide x 10” long x 3” high

Magnetic wire manager

Model Code: WMAG

Recommended for: Coby Square, Empire, Jewel, Lincoln (square or rectangular bases only)

1” deep X 2" wide x 17.75" tall; 22GA steel with open slot to accommodate any cable. It weighs 1 lbs.

Available in Black, Silver and White 

Cable Base with holes

Model Code: WB

Recommended for: Coby Apron, Coby Post, Gateway, Harbor, Supreme

1.5” x 2.5" holes cut in the top and bottom of the base column to feed wire(s) in and out of base.

Snap on wire manager

Model Code: WMC2.3

Recommended for: Gateway “TT” bases and Gateway beam nesting tables

Easy steel snap-on cover has the capacity for many cables. Standard 17 3/4” length

Available in Black, Silver or White 

Steel Cable Trough

Model Code: WT

Recommended for: Railway or Trestle Tables. Also, commonly used with Jazz and Volt power units.

12” x 34” long x 6” high, black 18GA steel trough with side access holes. 

Industrial Locking Casters

Model Code: CSI

Recommended for: Coby Apron, Coby Post, Coby Square, Lincoln and Union 2.0 tables. 

Designed for both hard & soft floors. The grey polyurethane wheel is 5" high and has ball bearings.

Weight capacity is 300 lbs. per caster