EMPIRE Photos

  • Hi5 Empire conference and meeting tables
  • Hi5 Empire conference and meeting tables
  • Hi5 Empire training tables are available in pneumatic, hand crank, and electric adjustable heights.
  • Hi5 Empire cafe tables are available in pneumatic, hand crank, and non-height adjustable stationary tables.
  • Hi5 Empire adjustable height tables
  • Hi5 Empire training tables are available nesting tables
  • Hi5 Empire training tables are available nesting tables
  • Hi5 Empire Nesting Tables
  • Hi5 Empire C-base training tables
  • Hi5 Empire T-base training tables
  • Hi5 Empire cafe table in square disc base with pneumatic
  • Hi5 Empire cafe table in round disc base with pneumatic height adjustable.
  • Hi5 Empire cafe table in X-base with pneumatic height adjustable.
  • Hi5 Empire TT-base are available in electric adjustable height and stationary non-adjustable height.
  • Hi5 Empire Cafe table in T-base with hand crank height adjustment.
  • Hi5 Empire Electric Push Botton
  • Hi5 Empire Electric Push Botton
  • Hi5 Empire tables come standard with adjustable levelers.
  • Hi5 Empire tables available on locking casters. Casters raise overall table height by 2

Empire Collection

You have never experienced a height adjustable table like the Empire Collection with a height range from 20 inches low to 48 inches high! The Empire is a lounge table for lingering conversations that raises to standing height to keep a 5 minute sales call on track. Height adjustable mechanisms offered are electric, pneumatic, hand crank and pin height adjustable legs.  
  • HAND CRANK SPECS – Adjustment at the turn of the handle.  Screw thread adjustment with infinite stop positions.  Adjust with manual crank handle at a rate of 6-1/3 turns per inch (4mm pitch). Table height range of 9.5”, 27.25” – 36.75”. Handle slides under table when not in use.  Maximum lifting load of 180 pounds for single column and 225 pounds for two columns, maximum of three (3) columns adjusted from one crank handle.  Option for locking casters is available which adds 2” to starting height.
  • PNEUMATIC SPECS – Pneumatic adjustment with easy lever release. Pneumatic cylinder assist with infinite stop positions with no-bounce cylinder stop. Steel roller glide system. Unintentional-release resistant lever with cable release. Table height range of 17.7”,  27.25”h to 45”h. Range Lifting force of forty four (44) pounds standard.  Additional lifting forces are available, contact factory for information. Available options include Flip-top and Locking Casters. Casters add 2” to starting height.
  • ELECTRIC SPECS – Electric motor adjustment at the touch of a switch.   Infinite stop positions with adjustment speed of 1.97” per second (50mm/sec). Two table height ranges to choose from: 19.69” of range, 27.25”h to 46.94”h or 26” of range, 22.25”h to 48.25”h.  Simple up and down buttons, control up to 12 columns from a single keypad.  Maximum lifting force of 225 pounds for two columns.  Options and accessories include: Built-in Key pad w/display, Built-in memory kepad with display, key pad cable extensions, motor cable extensions, Link Cables, and safety sensors.
 

Standard keypad is mounted as stationary and does not store under surface. Moves table UP | DOWN and allows infinite stops.

Preset Memory keypad slides in and out to store under surface when not in use. Digital display shows approximate height of table. Moves table UP | DOWN and allows 4 preset memory positions.

Digital keypad mounts in surface and displays approximate height of the table. If casters are added to the table, the digital keypad is not recommended. Moves table UP | DOWN and allows infinte stops.

 

The pneumatic bases are offered in “X” style and “T” style bases with a single handle release.

PNEUMATIC SPECS – Pneumatic adjustment with easy lever release. Pneumatic cylinder assist with infinite stop positions with no-bounce cylinder stop. Steel roller glide system. Unintentional-release resistant lever with cable release. Table height range of 17.7”,  27.25”h to 45”h. Range Lifting force of forty four (44) pounds standard.  Additional lifting forces are available, contact factory for information. Available options include Flip-top and Locking Casters. Casters add 2” to starting height.

 

Empire Features

  • Options include: Stationary, Nesting, Height Adjustable and Mobile tables
  • The hand crank tables adjust from 27.25 – 36.75” high
  • The pneumatic tables adjust from 27.25” – 45” high
  • The electric tables adjust from either 27.25” – 47” or 22.25” – 48.25”
  • Electric options include 3 electric key pad choices
  • Heavy duty construction for high use spaces – solid steel bases
  • Supports HPL, solid surface and back painted glass table tops
  • Powered or non-powered table options
  • Available in power coat

EMPIRE Sizes + Shapes

Standard Shapes  & Sizes:

Round Tables in stationary, mobile, nesting, pneumatic, hand crank and electric height adjustable
24    |    30    |    36    |    42    |    48    |    60

Square Tables in stationary, mobile, nesting, pneumatic, hand crank and electric height adjustable
24    |    30    |    36    |    42    |    48    |    60

Trapezoid Tables in stationary, mobile, and nesting
24    |    30    widths
60    |    72    lengths

Half Rounds Tables in stationary, mobile, and nesting
24    |    30    |    36    widths
48    |    60    |    72    lengths

Crescent Tables in stationary, mobile, and nesting
24    |    30    |    36    widths
48    |    60    |    72    lengths

Rectangle Tables in stationary, mobile, nesting, pneumatic, hand crank and electric height adjustable
18    |    24    |    30    |    36    |    42    |    48    |    60            widths
24    |    30    |    36    |    42    |    48    |    60    |    72    |    84    lengths
96    |    108    |    120    |    144    |    168    |    192    |    216    |    240    lengths

Boat Shaped Tables in stationary, mobile, nesting, pneumatic, hand crank and electric height adjustable
18    |    24    |    30    |    36    |    42    |    48    |    60            widths
24    |    30    |    36    |    42    |    48    |    60    |    72    |    84    lengths
96    |    108    |    120    |    144    |    168    |    192    |    216    |    240    lengths

Racetrack Tables in stationary, mobile, nesting, pneumatic, hand crank and electric height adjustable
18    |    24    |    30    |    36    |    42    |    48    |    60            widths
24    |    30    |    36    |    42    |    48    |    60    |    72    |    84    lengths
96    |    108    |    120    |    144    |    168    |    192    |    216    |    240    lengths

EMPIRE Technology + Options


Empire Finishes

LAMINATES WITH SELF EDGES

L6 Self Edge
1.25" thick laminate top.
EDGE: Self edges
Square corners.

WILSONART® www.wilsonart.com/laminate/design-library
Standard WilsonArt laminates are included in Hi5 list prices

10% Upcharge for premiums with these finishes: -60 (Matte), -38 (Fine Velvet) -07 (Textured Gloss), -18, (Linearity), -78 (Fine Grain

20% Upcharge for premiums with these finishes: 12 (SoftGrain), -22 (Antique), -52 (Quarry)

35% Upcharge for premiums with these finishes: -35 (Mirage), -45 (Facet), -55 (Glaze)

35% Upcharge for Virtual Design Library laminates www.wilsonart.com/laminate/virtual-design-library

FORMICA® www.formica.com/en/us/products/formica-laminate#swatchesTab
Standard Formica laminates are included in Hi5 list prices

20% Upcharge for premiums Including these finishes: -58 (Matte), -09 (Brush ed), -15 (Quilted), -42 (Sparkle), -43 (Artisan), -45 (Punched),-46 (Etchings), -47 (Powdered), -77 (Honed), -90 (Polished), -CT (Chetop2), -FV-Velour) , -LX (Luxe), -MC (MicroDOT), -NT (Naturelle), -RD (Radian ce), – RW (River wash), -SP(Sculpted), Grained, Midgrain, AR Plus, Chiselled, loss, NDF, Quarry, Rigato, Softmat

Color Core Choices:

35% Upcharge for Color Core www.formica.com/en/us/products/colorcore2#swatchesTab

Black Formica
909-58
Fog Formica
961-58
Folkstone Formica
927-58
Mission White
Formica
933-58
New White
Formica
7223-58
Spectrum Red
Formica
845-58
Surf Formica
923-58
White Formica
949-58

To order physical samples, please visit: http://www.wilsonart.com/laminate-surfaces

X

Finishes » LAMINATES WITH SELF EDGES »

LAMINATES WITH MATCHING HIGH IMPACT EDGES

L3 High Impact PVC Edge
1.25" thick laminate top.
EDGE: Flat 3mm High Impact PVC
Square corners.
L11 High Impact PVC Knife Edge
1.25" thick laminate top.
EDGE: Knife 3mm PVC / sealed
Square corners.

Graded in Laminates with Matching PVC

Designer White D354-60
Dove Grey D92-60
Shadow D96-60
Slate Grey D91-60
Black 1595-60
Hi5 recommends a textured finish when using black laminate on the table top, such as WilsonArt 1595-18.
Grey Glace 4142-60
Western Suede 4871-60
Vapor Strandz 4939K-18
Astro Strandz 4940K-18
Cosmic Strandz 4941K-18
Satin Stainless 4830K-18
Silver Alchemy 4860K-07
Steel Mesh 4879-38
5th Ave Elm 7966K-12
Beigewood 7850-60
High Line 7970K-18
Zebrawood 7980K-18
Amber Cherry 7919K-78
Walnut Heights 7965K-12
Zanzibar 7957K-78
Phantom Cocoa 8213K-28
Xanadu 7945K-18
Skyline Walnut 7964K-12
Asian Night 7949K-18
Saddle Oak 8206K-16

To order physical samples, please visit: http://www.wilsonart.com/laminate-surfaces

X

Finishes » LAMINATES WITH MATCHING HIGH IMPACT EDGES »

LAMINATES WITH MATCHING WOOD EDGES

L20 Solid WoodEdge
1.25" thick top.
EDGE: Square 1.25" w x 1.25" h
Solid wood edges.
Mitered square corners.
L33 Solid Knife WoodEdge
1.25" thick top.
EDGE: Knife 2" w x 1.25" h
Solid wood edges.
Mitered square corners.
L17 Baltic Birch Bullnose Woodedge
1.25" thick top.
EDGE: Bull nose .625" w x 1.25" h
Baltic birch wood edges.
Mitered square corners.
L18 Baltic Birch Knife Woodedge
1.25" thick top.
EDGE: Knife 2" w x 1.25" h
Baltic birch wood edges.
Mitered square corners.

Beigewood 7850-60
High Line 7970K-18
Zebrawood 7980K-18
Amber Cherry 7919K-78
Walnut Heights 7965K-12
Zanzibar 7957K-78
Phantom Cocoa 8213K-28
Xanadu 7945K-18
Skyline Walnut 7964K-12
Asian Night 7949K-18
Saddle Oak 8206K-16

To order physical samples:
Email your quote number, project name and ship to address to
VICKY SEEK: vicky@hi5furniture.com
COVERS THESE STATES: AL, CT, DE, FL, GA, IN, KY, ME, MD, MA, MI, MS, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV

CARRIE MCCARTHY: carrie@hi5furniture.com
COVERS THESE STATES: AR, AK, AZ, CA, CO, HI, IA, ID, IL, KS, LA, MT, MN, MO, OK, NE, NV, NM, ND, OR, SD, TX, UT, WA, WI, WY

X

Finishes » LAMINATES WITH MATCHING WOOD EDGES »

METAL FINISHES

Silver [SL]
Available on all metal items including Power Boxes, Modesty Panels and Union Hardware
Black [BK]
Available on all metal items including Power Boxes, Modesty Panels and Union Hardware

To order physical samples:
Email your quote number, project name and ship to address to
VICKY SEEK: vicky@hi5furniture.com
COVERS THESE STATES: AL, CT, DE, FL, GA, IN, KY, ME, MD, MA, MI, MS, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV

CARRIE MCCARTHY: carrie@hi5furniture.com
COVERS THESE STATES: AR, AK, AZ, CA, CO, HI, IA, ID, IL, KS, LA, MT, MN, MO, OK, NE, NV, NM, ND, OR, SD, TX, UT, WA, WI, WY

X

Finishes » METAL FINISHES »

EMPIRE Pricing

2014 FRONT COVER

EMPIRE Resources

Lead Times

The information for the Lead Times Are:

  • 6-8 weeks to ship

E-mail This Page



( e.g. mike@hotmail.com, sales@yourcompany.com, sara@gmail.com )


Send Me A Copy

We will not use the address you submit for any other purpose, nor will it be sold, traded or given away. Review our Privacy policy.

Lead Times

Lead Times:

  • SHIPMENTS IN JUNE SHOULD EXPECT ONE ADDITIONAL WEEK OF LEAD TIME
  • CUSTOMS ARE 6-8 WEEKS
  • Arlington tables are 5-6 weeks
  • aFIX per quote
  • Canyon tables are 8 weeks
  • Coby Square tables are 6-8 weeks
  • Coby U tables are 6-8 weeks
  • Coby Apron tables are 6-8 weeks
  • Empire tables are 8 weeks
  • Gateway tables are 6-8 weeks
  • Harbor tables are 6-8 weeks
  • Island tables are 6-8 weeks
  • Pinnacle tables are 6-8 weeks
  • Railway tables are 6-8 weeks
  • Supreme tables are 5-6 weeks
  • Union tables are 6-8 weeks
  • Accessories including credenzas, AV cabinets, etc. are 8 weeks
  • RUSH ORDERS INCLUDE UP-CHARGES AND ARE EVALUATED ON A CASE BY CASE BASIS